Saturday, February 5, 2011

How to Use Shampoo to Clean Your Carpets...carpet shampoo .


Drying the carpet-make sure you place plenty of fans and air circulation on your carpet before placing your furniture back on your freshly shampooed carpet. Make sure you get the carpet very dry to prevent any mold growth. If you have any furniture that have metal feet, make sure you cut out a piece of cardboard a bit bigger in diameter than your feet and place these pieces of cardboard under each foot. This will prevent any rusting on your carpet if your carpet is not quite dry and or you currently have a high degree of humidity in your area. I suggest you do this step either way, for it is best to take precautions to prevent any disappointments with nasty rust spots on your carpet....carpet shampoo .


Cleaning up your shampooer- maintaining your carpet shampooer is important. After dumping the dirty water out of your shampooer, put half a cup of vinegar into a small amount of clean water in the clean water tank and run the shampooer with the vacuum off, either outside or over a floor drain. Run the shampooer until the water is gone. Rinse out the dirty water tank well and don't put the cover on tightly, but let air get into the tank to keep it fresh and to dry out well. Last but not least, clean the brush. If possible, take the brush off and rinse it under the faucet. Clean out around the area where the brush is, this is where the dirt collects when shampooing....carpet shampoo .

Now you can sit back and enjoy your clean carpet!

Ref: Carpet & Rug Institutes Carpet Maintenance Guidelines

Products I Like To Clean My Carpets:Febreze Carpet care

No comments:

Post a Comment